NEC Univerge SV9100 - Method 2 - Set Automatic Trunk Forwarding

170
Method 2 (follows the pre-defined destination in Program 24-05-01)
Set Automatic Trunk Forwarding:
The Speed Dial bin must be defined in Program 13-04-01 for the line to forward.
1. Lift the handset.
2. Dial 702.
3. Dial the Department Group number (01~64) to be defined.
4. Press Speaker to hang up.
Cancel Automatic Trunk Forwarding:
1. Lift the handset.
2. Dial 703.
3. Dial the Department Group number (01~64) to be defined.
4. Press Speaker to hang up.