NEC Univerge SV9100 - To Place a DISA Call into the System (from any 2500 Type Telephone)

393
Program
Number
Program Name/Description
Input Data
Default
25-07-08
System Timers for VRS/DISA – Long
Conversation Disconnect Time
Determine the time the system waits before
disconnecting a DISA or any automatically
transferred trunk-to-trunk (such as Tandem
Trunking) call after the Long Conversation tone
is heard.
This program has no affect if Program 25-07-07
is set to 0.
This applies to automatically transferred
Tandem Trunk and DISA calls.
0 ~ 64800 seconds
10
Operation
To place a DISA call into the system (from any 2500 type telephone):
1. Dial the telephone number that rings the DISA trunk.
2. Wait for the DISA trunk to automatically answer with a unique dial tone.
3. Dial the 6-digit DISA password (access code).
4. Wait for a second unique dial tone.
5. Dial an extension.
- OR -
Dial 9 for Trunk Group Routing or ARS.
- OR -
Dial Alternate Trunk Route Access Code (if enabled).
- OR -
Dial 804 + a trunk group number (1~100) for an outside call.
- OR -
Dial #9 + a trunk number (1~400) for an outside call.
- OR -
Dial #2 + System Speed Dialing bin number.
- OR -
Dial 0 for the operator.
- OR -
Dial 801 + an Internal Paging Zone number (0, 1~9, 00, 01~64).
- OR -
Dial 803 + an External Paging Zone number (1~8 or 0 for All Call).
- OR -
Dial 810 + a busy extension number to barge in to a call.