NEC Univerge SV9100 - To Cancel Call Forward - Busy;No Answer at a Forwarding Station; To Cancel Call Forward - Immediate at a Forwarding Station; To Set Call Forward - Busy;No Answer at a Forwarding Station; To Set Call Forward - Immediate at a Forwarding Station

147
Operation
To set Call Forward – Immediate at a forwarding station:
1. Pick up the handset or press Speaker.
2. Dial the Call Forward – Immediate Service Code (default: 841).
- OR -
At the multiline terminal only, press the Call Forwarding Programmable Function Keys.
(Program 15-07-01, 10 or SC 851, Key Code 10)
3. Dial 1 (Set).
4. Dial the destination extension or off-premise number.
5. Press Speaker or hang up.
 Refer to Voice Response System (VRS) – Call Forwarding – Park and Page .
 The Call Forwarding Programmable Function Key lights.
To cancel Call Forward – Immediate at a forwarding station:
1. Pick up the handset or press Speaker.
2. Dial the Call Forward – Immediate Service Code (default: 841).
- OR -
At the multiline terminal only, press the Call Forwarding Programmable Function keys.
(Program 15-07-01, 10 or SC 851, Key Code 10)
3. Dial 0 (Cancel).
4. Press Speaker or hang up.
 The Call Forwarding Programmable Function Key turns off.
To set Call Forward – Busy/No Answer at a forwarding station:
1. Pick up the handset or press Speaker.
2. Dial the Call Forward – Busy/No Answer Service Code (default: 844).
- OR -
At the multiline terminal only, press the Call Forwarding Programmable Function keys.
(Program 15-07-01, 13 or SC 851, Key Code 13)
3. Dial 1 (Set).
4. Dial the destination extension or off-premise number.
5. Press Speaker or hang up.
 Refer to Voice Response System (VRS) – Call Forwarding – Park and Page
 The Call Forwarding Programmable Function Key turns on.
To cancel Call Forward – Busy/No Answer at a forwarding station:
1. Pick up the handset or press Speaker.
2. Dial the Call Forward – Busy/No Answer Service Code (default: 844).