NEC Univerge SV9100 - Page 146

146
Program
Number
Program Name/Description
Input Data
Default
24-09-03
Call Forward Split Settings – Intercom Call
Forwarding Destination for Both ring, All
Call, No Answer
Assign Intercom Call Forwarding Destination
for ring, all call and no answer.
Maximum of 24 digits (0 ~ 9,
*
,
#, @, P, R)
@ = Wait for Answer
Supervision - ISDN trunks only
P = Pause - Analog Trunk Only
R = Hook flash - Analog Trunk
Only
No Setting
24-09-04
Call Forward Split Settings – CO Call
Forwarding Busy Destination
Assign CO Call Forwarding for busy
destinations.
Maximum of 24 digits (0 ~ 9,
*
,
#, @, P, R)
@ = Wait for Answer
Supervision - ISDN trunks only
P = Pause - Analog Trunk Only
R = Hook flash - Analog Trunk
Only
No Setting
24-09-05
Call Forward Split Settings – Intercom Call
Forwarding Busy Destination
Assign Intercom Call Forwarding for busy
destinations.
Maximum of 24 digits (0 ~ 9,
*
,
#, @, P, R)
@ = Wait for Answer
Supervision - ISDN trunks only
P = Pause - Analog Trunk Only
R = Hook flash - Analog Trunk
Only
No Setting
24-09-06
Call Forward Split Settings – Call
Forwarding Destination for CTX/PBX for All
Call, No Answer
Assign Call Forwarding for CTX/PBX all call, no
answer destinations.
Maximum of 24 digits (0 ~ 9,
*
,
#, @, P, R)
@ = Wait for Answer
Supervision - ISDN trunks only
P = Pause - Analog Trunk Only
R = Hook flash - Analog Trunk
Only
No Setting
24-09-07
Call Forward Split Settings – Call
Forwarding Destination for CTX/PBX for
Busy
Assign Call Forwarding destinations for busy
CTX/PBX calls.
Maximum of 24 digits (0 ~ 9,
*
,
#, @, P, R)
@ = Wait for Answer
Supervision - ISDN trunks only
P = Pause - Analog Trunk Only
R = Hook flash - Analog Trunk
Only
No Setting