16
Account Code Setup – Hiding Account
Codes
For each Class of Service (1 ~ 15), enter 1 to
have the system hide Account Codes on an
extension display as they are entered. Enter 0
to have the Account Codes displayed.
0 = Account Codes not
displayed
1 = Account Codes displayed
SMDR Account Code Setup – Verified
Account Code
Enter Account Codes in the Verification
Account Code List. You can enter up to 2000
codes with 3 ~ 16 digits, using the characters
0~9 or #. Use the LK1 to enter a wild card. For
example, the entry @234 means the user can
enter 0234-9234.
This Program will accept a 1 or 2 digit code
but
requires a valid input of 3 ~ 16 digits to function.
Maximum of 16 digits.
1 ~ 9, 0, #, @ (@ = Wild card)
Operation
To enter an Account Code anytime while on a trunk call:
The outside caller cannot hear the Account Code digits you enter. Use this procedure if your system has
Optional Account Codes enabled. You may also use this procedure for incoming calls. This procedure is
not available for single line telephones.
1.
Dial
*
.
- OR -
Press your Account Code key (Program 15-07 or SC 851: code 50).
2.
Dial your Account Code (1~16 digits, using 0~9 and #).
If Account Codes are hidden, each digit you dial shows * on the telephone display.
3.
Dial *.
- OR -
Press your Account Code key (Program 15-07 or SC 851: code 50).
To enter an Account Code before dialing the outside number:
If your system has Forced or Verified Account Codes, you may use this procedure instead of letting the
system prompt you for your Account Code. You may also use this procedure if your system has Optional
Account Codes.
If your system has Verified Account Codes enabled, be sure to choose a code programmed into your
Verified Account Code list.
1.
Access trunk for outside call.
Press a line key or dial a code to access a trunk.
2.
Dial *.
To Next Page
Loading...
