NEC Univerge SV9100 - Emailing Alarm Reports; Printing Reports; Printing System Information Reports

35
Program
Number
Program Name/Description
Input Data
Default
90-24-04
System Alarm Report Notification Time
Setup – Minute
Set the minute for the alarm report to print.
Minute 00 ~ 59
00
Printing Reports:
Program
Number
Program Name/Description
Input Data
Default
90-12-01
System Alarm Output – Output Port Type
Indicate the type of connection used for the
System Alarms. The baud rate for the COM
port should be set in Program 10-21-02.
0 = No Setting
1 = USB Memory
0
Printing System Information Reports:
Program
Number
Program Name/Description
Input Data
Default
90-13-01
System Information Output – Output Port
Type
Indicate the type of connection system
information.
0 = No Setting
5 = USB
0
Emailing Alarm Reports
Program
Number
Program Name/Description
Input Data
Default
10-12-01
GCD-CP10 Network Setup – IP Address
Assign the IP Address.
0.0.0.0 ~ 126.255.255.254
128.0.0.1 ~ 191.254.255.254
192.0.0.1 ~ 223.255.255.254
192.168.0.10