NEC Univerge SV9100 - Voice Mail Message Indication on Line Keys

1324
Voice Mail Message Indication on Line Keys
Description
Voice Mail Message Indication on Line Keys indicates a new voice mail message on Line Keys or DSS/
BLF keys.
Conditions
When a DSS key of an installed extension is pressed when flashing that extension is called.
You have to use a VM Message key (code 77) to get the indication when there is a new
message. It can be used also for installed extensions.
VM Message key calls the VM and logs into the mail box.
If a VM Message key for extension A is placed on extension A, the Large LED does not light
on extension A for new message indication. Instead the VM Message key flashes green.
VM message LED is a higher priority then any other status for the DSS/BLF key.
The enabling or disabling of Voice Mail Indication on BLF enables the station with the
message to show up on other telephones. It does not enable/disable stations from seeing
the BLF indication.
Virtual Extension Keys assigned as code *03 do not support Voice Mail Message Indication
on Line Keys.
Default Settings
Not allowed
System Availability
Terminals
All Multiline Terminals
Required Component(s)
VM (Digital or Analog)
Related Features
Class of Service
Direct Station Selection (DSS) Console
Programmable Function Keys
UM8000 Mail