47
Ancillary Device Connection
Description
Ancillary Device Connection allows installation of selected peripheral (ancillary) devices to a multiline
terminal. This feature enhances peripheral device objectives.
An UNIVERGE SV9100 multiline terminal user can accomplish this by using the AP(R)-R/APR-L Unit
(Analog Port Adapter with Ringer) or AP(A)-R Unit (Analog Port Adapter without Ringer) for analog
telephone devices, or installing the AD(A)-R/APA-L Unit to connect devices such as tape recorders.
The AP(A)-R/AP(R)-R/APA-L Units are the interface for installing a single line telephone, Modem, credit
card reader, wireless headset, NEC Conference Max Conferencing unit or other compatible analog
device.
The PSA-L Unit (Power Save Adapter), an optional adapter for the ITL/DTL Terminals, is used to make
or receive a call using the Public Switched Telephone Network (PSTN) when a call cannot be made with
the ITL/DTL extension.
Conditions
The optional device fits underneath the terminal.
A single line telephone connected to an AP(R)-R Unit or AP(A)-R Unit cannot perform
Trunk-to-Trunk Transfer and does not support a conference with itself and two outside
parties.
A single line telephone connected to an AP(R)-R Unit or AP(A)-R Unit does not support
Message Waiting Indication or Caller ID Indication.
An AP(R)-R Unit (analog port adapter with ringer) can be installed on a multiline terminal
and function separately from the multiline terminal.
When Program 10-03-06 is assigned as APR you cannot manually assign a port number for
an
APR. The system uses ports 193~256 (starting with 256 and working down) for a total
of
64 APR ports. APR 1 uses port 256, and APR 2 uses port 255, and so on.
When Program 10-03-06 is assigned as APR you cannot manually assign a port number for
the APR.
Phones that have an APR/APA installed do not pass voice to a trunk until the interdigit time
expires (Program 21-01-03).
When a single line phone is connected to an AP(R)-R or APR-L, a conference cannot be
established unless the 2nd channel of ESI is used for APR in Program 10-03-06 and
Program 10-03-07.
When a single line phone is connected to an AP(R)-R or APR-L, the 2nd channel of ESI
must be used (Programs 10-03-06 and 10-03-07) to switch back and forth between a call
and call waiting.
APR-L does not support DTL-2E-1, DTL-6E-1, DTZ-2E, DTZ-6DE or all ITZ/ITL style
phones.
ADA-L can send confirmation sound to far end, but the recording machine must generate
confirmation sound.
To Next Page
Loading...
