998
Programmable Function Keys
Description
Each multiline terminal has Programmable Function Keys. Programmable Function Keys simplify placing
calls, answering calls and using certain features. You can customize the function of a multiline terminal
programmable keys from each multiline terminal. Depending on your telephone style, you can have up
to 48 Programmable Function keys.
Conditions
When a key is programmed using service code 852, that key cannot be programmed with a
function using the 851 code until the key is undefined (000). For example with a Park Key
programmed by dialing 852 + *04 must be undefined by dialing 000 before it can be
programmed as a Voice Over key by dialing 851 + 48.
Using Program 92-01 to copy a multiline terminal Programmable Function Keys, copies all
the keys whether or not they exist on the telephone to which the programming is being
copied. This may cause confusion when trying to define a key which is already defined but
which does not exist on the telephone (displays as DUPLICATE DATA). It is recommend to
either clear these non-existent keys or to copy only from an extension which has the same
or fewer number of keys than the extension to which the programming is being copied.
Speed Dialing and One-Touch Calling also offer quick access to calls and features.
Programming a 60-button console requires separate programming.
If the feature key is not listed below, the LCD shows ALL-BLANK. (Program 15-07-01 Line
Key Assign).
Number
Function
Display
1
None
[All Blank]
2
DSS/One-Touch
DSS (xxxxxxxx xxxxxxxx = Extension Number)
3
Microphone Key (ON/OFF) MIC
4
DND Key DND
5
BGM (ON/OFF) BGM
6
Headset
HSET
07
Conference Key CONF
10
Call Forward – Immediate CFA
11
Call Forward – Busy CFB
12
Call Forward – No Answer CFNA
13
Call Forward – Busy/No Answer CFBNA
14
Call Forward – Both Ring CFBOTH
15
Follow Me FLWME
If a key is programmed as a DSS/One-Touch key for a station that is set for Call Forward All Calls or
To Next Page
Loading...
