NEC Univerge SV9100 - To Activate Call Forward Follow Me from a Multiline Terminal

153
Guide to Feature Programming
Program
Number
Program Name/Description
Input Data
Default
11-11-07
Service Code Setup (for Setup/Entry
Operation) – Call Forwarding – Follow Me
Assign the service code of Call Forward Follow
Me.
MLT, SLT
0 ~ 9,
*
, # Maximum of eight
digits
846
15-07-01
Programmable Function Keys
Assign functions to multiline terminal line keys.
Line Key 1 ~ 48
0 ~ 99 (Normal Function Code
851 by default)
*
00 ~
*
99 (Appearance
Function Code) (Service Code
852 by default)
20-06-01
Class of Service for Extensions
Assign a Class of Service (1 ~ 15) to
extensions.
Day Night/Mode: 1 ~ 8
Class of Service of Extensions
(1 ~ 15)
Extension port
101 = Class 15
All other
extension port =
Class 1
20-11-05
Class of Service Options (Hold/Transfer
Service) – Call Forwarding with Follow Me
Turn Off or On an extension user ability to set
Call Forward with Follow Me.
0 = Off
1 = On
COS 1 ~ 15 = 1
Operation
To activate Call Forward Follow Me from a multiline terminal:
1. At a multiline terminal, other than your own, press Speaker and dial Service Code (846, Program
11-11-07).
- OR -
Press the Call Forward Follow Me key (Program 15-07-01 or SC 851: Code 15).
2. Dial 1 to set.
3. Dial the Extension to forward.
 The multiline terminal with display indicates on the display of the telephone which Call Forward
Follow Me is set. Also, the Programmed Follow Me Flexible Line Key flashes (if assigned) when
Follow Me is set.