NEC Univerge SV9100 - To Place an Emergency 911 Call

473
Program
Number
Program Name/Description
Input Data
Default
20-06-01
Class of Service for Extensions
Assign a Class of Service (1 ~ 15) to an
extension.
Day Night/Mode: 1 ~ 8
Class of Service of Extensions
(1 ~ 15)
Extension port
101 = Class 15
All other
extension port =
Class 1
20-08-13
Class of Service Options (Outgoing Call
Service) – ISDN CLIP
Determine if the ISDN calling line identity
presentation and screening indicators should
be allowed.
0 = Off
1 = On
0
21-12-01
ISDN Calling Party Number Setup for Trunks
Assign Calling Party Numbers for each trunk
(maximum 16 digits per entry). When a call is
made by an extension which does not have an
Extension Calling Number assigned (Program
21-13), the system sends the calling number for
the ISDN trunk defined in 21-12. If the Calling
Party Number is assigned in both Program
21-12 and Program 21-13, the system sends
the data in Program 21-13.
0 ~ 9,
*
, # Maximum of 16 digits
All Trunks = No
Setting
21-13-01
ISDN Calling Party Number Setup for
Extensions
Assign each extension a Calling Party Number
(maximum 16 digits per entry). The calling
number is the subscriber number of the dial-in
number. When a call is made by an extension
which does not have an Extension Calling
Number assigned (Program 21-12), the system
sends the calling number for the ISDN trunk
defined in Program 21-13. If a Calling Party
Number is assigned in both Program 21-12 and
Program 21-13, the system sends the data in
Program 21-13.
0 ~ 9,
*
, # Maximum of 16 digits
No Setting
Operation
To place an emergency 911 call
When Dial 911 Routing Without Trunk Access is enabled:
1. Go to any telephone.
2. Lift the handset or press Speaker.
3. Dial 911.
When Dial 911 Routing Without Trunk Access is disabled:
1. Go to any telephone.
2. Lift the handset or press Speaker.
3. Dial a trunk access code (e.g., 9) or press a line key.