165
Class of Service Options (Hold/Transfer
Service) – Department Group Trunk-to-
Trunk Transfer (Each Telephone Group
Transfer)
Turn On or Off an extension in a Department
Group ability to use the Trunk-to-Trunk
Forwarding service codes.
Department Group Transfer Target Setup
Assign the Speed Dialing number bin to be
used as the destination of the Department
Group Trunk-to-Trunk Forwarding.
Trunk-to-Trunk Forwarding – DID (3) Trunk Forwarding Using DID Translation Table:
Refer to Direct Inward Dialing (DID) for additional DID programming.
DID Translation Table Number Conversion –
Transfer Destination Number 1
For each DID Translation Table entry
(1 ~ 4000), specify the first and second Transfer
Destinations if the callers receives a busy or no
answer (action defined in Program 22-11-04).
If the Transfer Destinations are busy or receive
no answer, those calls are transferred to the final
transfer destination (Program 22-10).
0 = No Setting
1 ~ 1 00 = Incoming Group
101 = (Not Used)
102 = In-Skin/External Voice
Mail or InMail
201 ~ 264 = Extension Group
400 = Valid Extension Number
401 = DISA
501 ~ 599 = DISA/VRS
Message
1000 ~ 1999 = Speed Dial
Number (000 ~ 999)
DID Translation Table Number Conversion –
Transfer Destination Number 2
For each DID Translation Table entry
(1 ~ 4000), specify the first and second Transfer
Destinations if the callers receives a busy or no
answer (action defined in Program 22-11-04).
If the Transfer Destinations are busy or receive
no answer, those calls are transferred to the final
transfer destination (Program 22-10).
0 = No Setting
1 ~ 1 00 = Incoming Group
101 = (Not Used)
102 = In-Skin/External Voice
Mail or InMail
201 ~ 264 = Extension Group
400 = Valid Extension Number
401 = DISA
501 ~ 599 = DISA/VRS
Message
1000 ~ 1999 = Speed Dial
Number (000 ~ 999)
To Next Page
Loading...
