NEC Univerge SV9100 - Cancel the Line Forwarding; Set the Destination and Forward the Line; To Cancel Call Forwarding Off-Premise for a Door Box; Trunk-To-Trunk Forwarding

168
To cancel Call Forwarding Off-Premise for a Door Box:
1. At the multiline terminal, press Speaker + dial SC 822.
- OR -
At the multiline terminal only, press Call Forward (Device) key (Program 15-07-01 or SC 851,
code 54).
- OR -
At the single line telephone, lift the handset + dial 822.
2. Dial 0 (Cancel).
Trunk-to-Trunk Forwarding
Set the Destination and Forward the Line:
1. Lift the handset.
2. Dial 835.
3. Dial trunk port number (001~400) to be defined.
4. Select the mode (1~8) to be defined.
5. Enter the telephone number, which is the destination of the forwarded trunk.
 The number is stored in the Speed Dial bin number assigned in Program 24-04-01. This entry
overwrites any existing number defined in the bin.
6. Press Hold to accept the entry.
7. Repeat from Step 3 to define another mode entry or press Speaker to hang up.
Cancel the Line Forwarding:
1. Lift the handset.
2. Dial 835.
3. Dial trunk port number (001~400) to be defined.
4. Select the mode (1~8) to be defined.
5. Press the Exit key.
6. Press Speaker to hang up.