NEC Univerge SV9100 - To Adjust the Volume of Incoming Ringing and Splash Tone; To Adjust the Volume of Ringing Incoming Paging Announcements

1368
Required Component(s)
None
Related Features
Off-Hook Signaling
SV9100 Terminals
Guide to Feature Programming
Program
Number
Program Name
Description/Comments
Assigned Data
15-02-27
Multiline Telephone Basic Data Setup –
Handset Volume
Determine how an extension handset volume
is set after it is adjusted during a call.
When 1 is assigned, and a user sets the
volume to maximum, it is reset to a level to
meet FCC standards when the user hangs up.
0 = Back to Default (Back)
1 = Stay at previous level (Stay)
1
Operation
To adjust the volume of incoming ringing and splash tone:
1. If the telephone is idle, press Speaker and dial 829. If the telephone is ringing, skip to
Step 2.
2. Press VOLUME ▲ or VOLUME ▼.
To adjust the volume of ringing incoming Paging announcements, Handsfree, the
handset or Background Music:
1. Press VOLUME ▲ or VOLUME ▼.
 The feature must be active to change the volume. Press the volume keys when the
telephone is idle to adjust the display contrast.