NEC Univerge SV9100 - Convert Telephone Dialing to Tone after Placing Call on Pulse Line

1005
Program
Number
Program Name/Description
Input Data
Default
14-02-01
Analog Trunk Data setup – Signaling Type
(DP/DTMF)
At default, Program 14-02-01 is set to 2.
0 = Dial Pulse (10 PPS)
1 = Dial Pulse (20 PPS)
2 = DTMF
2
14-02-07
Analog Trunk Data Setup – DP to DTMF
Conversion Options
For each trunk, set the type of DP to DTMF
Conversion required.
0 = Automatic
1 = Automatic and Manual
2 = Manual
2
Operation
To convert your telephone dialing to tone after placing your call on a pulse line:
1. Place a call over pulse line.
2. Dial # to switch the DP trunk to DTMF dialing.