NEC Univerge SV9100 - Meet Me External Page

851
Program
Number
Program Name/Description
Input Data
Default
20-06-01
Class of Service for Extensions
Assign a Class of Service (1 ~ 15) to an
extension.
Day Night/Mode: 1 ~ 8
Class of Service of Extensions
(1 ~ 15)
Extension port
101 = Class 15
All other
extension port =
Class 1
20-10-06
Class of Service Options (Answer Service) –
Meet-Me Conference and Paging
Turn Off or On an extension user ability to use
Meet-Me Conference and Paging.
0 = Off
1 = On
COS 1 ~ 15 = 1
31-02-01
Internal Paging Group Assignment –
Internal Paging Group Number
Assign extensions to Internal Paging Groups
(i.e., Page Zones).
0 ~ 64
(0 = No Setting)
0 for IP Station
1 for TDM
Station
31-02-02
Internal Paging Group Assignment –
Internal All Call Paging Receiving
Allow/Deny All Call Internal Paging for each
extension. If allowed, extension can place and
receive All Call Internal Paging
announcements. If denied, extensions can
make, but not receive, All Call Internal Paging
announcements. If combined, Paging zones
should be restricted as well, change the internal
page zone group in Program 31-07-01 to 0.
0 = Deny
1 = Allow
0
Operation
Meet Me External Page
To make a Meet Me External Page:
1. At multiline terminal, press Speaker or pick up the handset.
- OR -
At the single line telephone, lift the handset.
2. Dial 803 and the External Paging Zone code (1~8 or 0 for All Call).
- OR -
Dial *1 and the Combined Paging Zone code 1~8 (for Internal/External Zones 1~8) or 0 (for
Internal/External All Call).
3. Announce the zone.
- OR -
1. At the multiline terminal, press the External Paging Zone key (Program 15-07 or SC 851: 19 +
zone).
2. Announce the zone.
To join a Meet Me External Page:
1. At the multiline terminal, press Speaker or pick up the handset.
- OR -