973
PC Programming
Description
The UNIVERGE SV9100 has three different methods for programming. The first is via the handset, the
second is by PCPro and third by WebPro.
PCPro is a Microsoft Windows based application. It allows the technician/system administrator to
download a database from the system, make changes, and then upload.
The WebPro application is a web server running on the GCD-CP10 blade of the SV9100 system. No
special installation program is required. When programming the system, use Internet Explorer other web
browsers are not currently supported.
An overview of the three programming applications is shown below.
PC Programming Overview
Connecting
As can be seen in PC Programming Overview, three connection types are available to
PCPro/WebPro.
If using PCPro, a user can connect directly, remotely using a modem or via LAN. A connection with the
system is made via the Connection Dialog in the application. (Refer to PCPro Connection
Dialog )
Modem (remote) connections are established via the internal GCD-CP10 modem. To access the
modem, dial a trunk that is directed to the modem access service code (DIL or DID) or dial an
extension that is redirected to the modem access service code. When connecting with a Modem, a
Dial Up Connection (PPP) must be set up in Windows Network Connections.
When uploading via a Dial Up connection, uploading card configuration (Hardware Upload) is not
To Next Page
Loading...
