NEC Univerge SV9100 - Supported System Feature List

706
Supported System Feature List
Feature Name
ML440
G566
G266
Comments
Account Code - Forced/Verified/
Unverified
Yes
Yes
Yes
Account Code Entry
Yes
Yes
Yes
Alarm
Yes
Yes
No
Supported Alarms:
ML440 – System and handset alarm available.
G566 – System and handset alarm available.
Alarm Reports
No
No
No
Alphanumeric Display
Yes
Yes
Yes
Time and Date Display:
– ML440 obtains time and date from SV9100 system.
– G566/G266 time and date is obtained from the DAP
controller PC.
Name:
– ML440 obtains display name from network domain.
– G556/G266 name is assigned per handset and does
not use the SV9100 system name.
Analog Communications Interface
(ACI)
No
No
No
Ancillary Device Connection
No
No
No
Answer Hold
No
No
No
Answer Key
No
No
No
Applications
No
No
No
Attendant Call Queuing
No
No
No
Automatic Release
Yes
Yes
Yes
Automatic Route Selection (ARS)
Yes
Yes
Yes
Background Music
No
No
No
Barge-In
Yes
No
No
ML440 – Can monitor but cannot use the microphone
toggle feature. The handset mute button is the only
way to mute audio from handset during monitoring.
G566/G266 – Can be barged into but cannot initiate
Barge-In.
Call Appearance (CAP) Keys
Yes
No
No
Call Arrival (CAR) Keys
Yes
No
No
Call Duration Timer
No
No
No
G566/G266 will show call duration briefly after hanging
up. More detailed call history information is available
on the call history log page.
Call Forwarding – Centrex
Yes
Yes
Yes
Call Forwarding with Follow Me
Yes
Yes
Yes
Only supported on G566/G266 when connected to
system (In Range).
Call Forwarding – Park and Page
No
No
No
Call Forwarding All Calls
Yes
Yes
Yes
Can be programmed in 24-09-xx, through feature code
from administrator desk set and from the handset
using dial access codes.