NEC Univerge SV9100 - Maximum System Capacities - Trunks;Ports;Channels

1286
SV9100 Maximum System Capacities – Trunks/Ports/Channels
9.5”
19” Chassis
Chassis
Number of:
System
x 1
x 1 x 2 x 3 X4
Maximum
(CPU + 2
(6 Slots) (12 Slots) (18 Slots) (24 Slots)
Slots)
Number of Timeslots
*
1
PCM
48
104
208
312
416
444
Data
7
7
14
21
28
28
DT400/DT300 TDM (-48V)
32
80
176
272
368
Total 896
SLT (-28V)
32
80
176
272
368
SLT (-48V)
8
20
44
68
92
DT800/DT700 IP
896
Desktop Applications
(Desktop Client, Desktop Client with
Shared Services and SoftPhones)
256
Total 256
SIP/WLAN
896
Total 896
Analog Trunks (COT)
16
40
88
136
184
Total 400
BRI
16
40
88
136
184
PRI (1.5M)
48
96
192
192
192
IP Trunk (SIP)
400
DTMF Receivers
80
80
144
144
144
*
2
VoIP Channels
256
256
Voice Mail Channels on CPU
16 channels
16
V34 Modem
1 channel
1
*
1 = For -law countries 104 timeslots per chassis are assigned the G.711 PCM communications (e.g., voice
communications) and 7 timeslots per chassis are assigned for the Data communications (e.g., HDLC over
ISDN). Thus the simultaneous data communications are limited up to seven per chassis.
*
2 = An additional 64 DTMF Receivers are available when the GPZ-BS10 is installed.
An additional 64 DTMF Receivers are available when the GPZ-BS10 is installed.
If using Caller ID to analog trunks and DSP resources are set to common, DSP resources will only be used for analog
trunks and not analog stations.