NEC Univerge SV9100 - To Program any Extension Name; To Program Your Extension Name

920
Program
Number
Program Name/Description
Input Data
Default
20-13-48
Class of Service Options (Supplementary
Service) – Station Name Display
Determine if a station Name is Displayed or Not
Displayed in the LCD when the phone is idle.
0 = Not Displayed
1 = Displayed
COS 1 ~ 15 = 1
20-13-51
Class of Service Options (Supplementary
Service) – Number and Name appear in the
Directory
Determine if an extension name and number
are Listed or Unlisted in the directory.
0 = Not Listed
1 = Listed
COS 1 ~ 15 = 1
Operation
To program your extension name:
1. Press Speaker.
2. Dial 800.
- OR -
Press the Extension Name Change key (Program 15-07 or SC 851: 55).
3. Press Hold.
4. Enter the name.
 Your name can be up to 12 digits maximum.
5. Press Hold.
6. Press Speaker to hang up.
To program any extension name:
1. Press Speaker.
2. Dial 800.
- OR -
Press the Extension Name Change key (Program 15-07 or SC 851: 55).
3. Enter the extension number to be named.
4. Enter a name.
 The name can be have to 12 digits maximum.
5. Press Hold.
6. Press Speaker to hang up.
Refer to Keys for Entering Names for and explanation for using the keypad to enter names.