NEC Univerge SV9100 - Page 919

919
Guide to Feature Programming
Program
Number
Program Name/Description
Input Data
Default
11-11-22
Service Code Setup (for Setup/Entry
Operation) – Extension Name Programming
Customize the service code used to edit
Extension Name Programming.
MLT
0 ~ 9,
*
, # Maximum of eight
digits
800
14-01-01
Basic Trunk Data Setup – Trunk Name
Set the names for trunks. The trunk name
displays on a multiline terminal for incoming
and outgoing calls.
Maximum of 12 characters.
Line 001
Line 002
Line 003
:
Line 400
15-01-01
Basic Extension Data Setup – Extension
Name
Define the extension/virtual extension name.
Maximum of 12 characters.
STA 101 = Ext
101
STA 102 = Ext
102, etc.
20-09-02
Class of Service Options (Incoming Call
Service) – Caller ID Display
Turn Off or On the Caller ID display at an
extension.
0 = Off
1 = On
COS 1 ~ 15 = 0
20-13-21
Class of Service Options (Supplementary
Service) – Extension Name
Turn Off or On an extension user ability to
program the name.
0 = Off
1 = On
COS 1 ~ 15 = 1
20-13-47
Class of Service Options (Supplementary
Service) – Station Number Display
Determine if a station Number is Displayed or
Not Displayed in the LCD when the phone is
idle.
0 = Not Displayed
1 = Displayed
COS 1 ~ 15 = 1