NEC Univerge SV9100 - To Cancel Call Forward - Busy;No Answer Using a Virtual Extension

151
To cancel Call Forward – Immediate at a forwarding station:
1. Press the idle Virtual Extension key.
2. Dial the Call Forward – Immediate Service Code (default: 841).
3. Dial 0 (Cancel).
4. Press Speaker or hang up.
To set Call Forward – Busy/No Answer using a Virtual Extension:
1. Press the idle Virtual Extension key.
2. Dial the Call Forward – Busy/No Answer Service Code (Default: 844).
3. Dial 1 (Set).
4. Dial the destination extension or off-premise number.
5. Press Speaker or hang up.
 Refer to Voice Response System (VRS) – Call Forwarding – Park and Page .
To cancel Call Forward – Busy/No Answer using a Virtual Extension:
1. Press the idle Virtual Extension key.
2. Dial the Call Forward – Busy/No Answer Service Code (default: 844).
3. Dial 0 (Cancel).
4. Press Speaker or hang up.