NEC Univerge SV9100 - Inmail POP3 Setup

38
Program
Number
Program Name/Description
Input Data
Default
47-18-07
InMail Setup – Password
Set the password for SMTP authentication.
Maximum of 48 characters
No Setting
47-18-08
InMail Setup – E-mail Address
Set the email address for the system. This is
the “from address” for outgoing emails.
Maximum of 48 characters
No Setting
47-18-09
InMail Setup – Reply to Address
Set the email address for replies to outgoing
emails. This email account is not monitored by
the system and must be checked manually.
Maximum of 48 characters
No Setting
InMail POP3 Setup:
Program
Number
Program Name/Description
Input Data
Default
47-19-01
InMail POP3 Setup – Server Name
Set the POP3 server name. If the DNS server
setting is not assigned in Program 90-11-11 the
IP Address must be used instead of the name.
Maximum of 48 characters
No Setting
47-19-02
InMail POP3 Setup – POP3 Port
Set the POP3 server port.
0 ~ 65535
110
47-19-03
InMail POP3 Setup – SSL Encryption
Enable SSL encryption.
0 = No
1 = Yes
0
47-19-04
InMail POP3 Setup – User Name
Set the user name for POP3 authentication.
Maximum of 48 characters
No Setting
47-19-05
InMail POP3 Setup – Password
Set the password for POP3 authentication.
Maximum of 48 characters
No Setting
Operation
To use this feature at any terminal:
The user must be logged in with an Installer (IN) level password as defined in Program 90-02.