424
Drop Key
Description
The Drop Key abandons a call while retaining the PBX/Centrex line to originate another call. The Drop
Key is provided by programming a Function Key. This feature allows Recall to be used to provide a
hookflash to the PBX or Central Office. A single line telephone user can use the Drop Key function with
an access code.
Conditions
The Drop Key provides a timed disconnect signal on CO/PBX lines.
The Drop Key cannot be used for internal, DID, or Tie line calls.
Default Settings
None
System Availability
Terminals
All Terminals
Required Component(s)
None
Related Features
Flash
PBX Compatibility
To Next Page
Loading...
