NEC Univerge SV9100 - To Store a Caller ID Number in a One-Touch Key

114
To store a Caller ID number in a One-Touch key:
1. With a telephone idle, the display shows:
2. Press the LIST Softkey.
- OR -
Press the Left Cursor Key twice and skip step 3. The display shows:
3. Press the CID Softkey (Caller ID). The display shows:
##:
xxxxxxxxxxxxx
mm-dd hh:mm


Store DEL
## = List Number
xx = Caller ID number
mm-dd hh:mm = incoming date and time
= Preview List
= Next List
Store = Store in List
DEL = Delete from List
4. Press the STORE Softkey. The display shows:
## = List Number
xx = Caller ID number
mm-dd hh:mm = incoming date and time
STA = Store in Station Speed Dial bin.
ABB = Store in Abbreviated Dial bin.
TELBK = Store in Telephone Book.
5. Press the STA or ABB or TELBK Softkey. The display shows:
6. Press the One-Touch key in which the number is to be stored or dial 1~9, 0. If you press Hold,
the next available One-Touch key is used. The display shows:
1-01 FRI 09:00AM
301 STA 301
LIST DIR VMsg 
LISTlMENU
Redial CID
##:
xxxxxxxxxxxxx
mm-dd hh:mm
STA Abb TELBK
Store to Personal ABB
ENTER BIN
Key ##:
xxxxxxxxxxxxx