NEC Univerge SV9100 - Flexible Transfer;Virtual Loopback Enhancement; Sample SMDR Report (Internal)

1130
If Program 35-02-18 = 1 (Caller ID Name Output Method) is set to line feed, the SMDR displays as
follows:
CLASS
POT
TIME
10:52
DATE
12/09
LINE
002
DURATION
00:00:10
STATION
2001
DIALLED No./CLI
2142623801
ACCOUNT
08754
PIN
10:52
12/09
001
00:00:20
2017
2142623802
NECinfrontia
Corp.
NEXT NECinfrontia Corp.
PIN
10:53
12/09
002
2142623801
NO ANSWER
Sample SMDR Report (Internal)
Example of SMDR Report
Flexible Transfer/Virtual Loopback Enhancement
When calls are routed through the ISDN Virtual Loopback, the SMDR information does not provide
enough information to provide complete tracking of route of the call. This has been enhanced with the
addition of a tag to any part of the call that is routed through the virtual loopback to enable complete
tracking of the call.
When a call is routed through the Virtual Loopback, or more precisely its S-point, it will return as a new
incoming call on the Loopback T-point trunk port.
Virtual Loopback – S-Point