NEC Univerge SV9100 - To Enter a Forced Account Code before Dialing the Outside Number

23
To enter a Forced Account Code before dialing the outside number:
If your system has Forced or Verified Account Codes, you may use this procedure instead of letting the
system prompt you for your Account Code. You may also use this procedure if your system has Optional
Account Codes.
If your system has Verified Account Codes enabled, be sure to choose a code programmed in your
Verified Account Code list.
1. Access trunk for outside call.
 Press a line key or dial a code.to access a trunk.
2. Dial * .
- OR -
Press your Account Code key (Program 15-07-01 or SC 851: code 50).
3. Dial your Account Code [1~16 digits, using 0~9 and # or (3~16 digits for Forced)].
 If you make an incorrect entry, your system may automatically alert the operator. If Account Codes
are hidden, each digit you dial shows * on the telephone display (depending on programming).
4. Dial * .
- OR -
Press your Account Code key (Program 15-07-01 or SC 851: code 50).
5. Dial the number you want to call.
To dial an outside number and let your system tell you when a Forced Account Code is required:
1. Access a trunk and dial the number you want to call.
2. Wait for your call to go through.
- OR -
3. If you hear “Please enter an Account Code,” (depending on system programming) and your
display shows ENTER ACCOUNT CODE.
Dial * .
- OR -
Press your Account Code key (Program 15-07-01 or SC 851: code 50).
Dial your Account Code (3~16 digits, using 0~9 and #).
If Account Codes are hidden, each digit you dial shows * on the telephone display.
Dial * .
- OR -
Press your Account Code key (Program 15-07-01 or SC 851: code 50).