NEC Univerge SV9100 - To Place a Trunk Call Using Hot Key-Pad; To Place an Intercom Call Using Hot Key-Pad

571
Hotline
Intercom
Voice Response System (VRS)
Guide to Feature Programming
Program
Number
Program Name/Description
Input Data
Default
20-06-01
Class of Service for Extensions
Assign a Class of Service to extensions
(1 ~ 15). Any Class of Service assignments you
change using Service Code 677 automatically
update this program.
Day Night/Mode: 1 ~ 8
Class of Service of Extensions
(1 ~ 15)
Extension port
101 = Class 15
All other
extension port =
Class 1
20-08-20
Class of Service Options (Outgoing Call
Service) – Hot Key Pad
Turn Off or On an extension user ability to make
a call by dialing the number without going
off-hook.
0 = Off
1 = On
COS 1 ~ 15 = 0
Operation
To place an intercom call using Hot Key-Pad:
1. The multiline terminal is idle. There is no need to press Speaker.
2. Dial the extension.
3. Dialed extension rings.
To place a trunk call using Hot Key-Pad:
1. The multiline terminal is idle. There is no need to press Speaker.
2. Dial the trunk access code, 9 by default, and the external destination number you want to call.