NEC Univerge SV9100 - SIP Phone Example

739
SIP Phone Example:
Example – SIP Phone
SIP Softphone
SIP Phone
The following menu items require programming in your SIP IP Phone (consult SIP Phone vendor specific
documentation):
Program/Item
No.
Description/Selection
Default Assigned Data
Comments
1
IP Address
0.0.0.0
Enter a Static IP Address for the SIP
Phone.
2
Subnet Mask
0.0.0.0
Enter the Subnet Mask Address.
3
Default Gateway
0.0.0.0
Enter the Default Gateway address.
4
GPZ-IPLE Address
0.0.0.0
Enter the GPZ-IPLE IP Address.
This information can be located in Program
10-12-09 UNIVERGE SV9100 Network Setup
IP Address.
5
Extension Number
0
Assign the SIP Phone extension. This
information must match Program 11-02-01
Extension Numbering.
Operation
None
Switch
GPZ-IPLE:192.168.1.20
Subnet Mask:255.255.255.0
Default Gateway: 192.168.1.254