NEC Univerge SV9100 - To Call a UCD Group; To Log Back in to Your UCD (Department Calling) Group; To Log out of Your UCD (Department Calling) Group

1277
Operation
To call a UCD Group:
1. At the multiline terminal, press Speaker.
- OR -
At single line telephone, lift the handset.
2. Dial the UCD group (department) extension or pilot number.
 The system routes the call to the first free telephone in the (UCD group) department.
To log out of your UCD (Department Calling) Group:
 While you are logged out, UCD (Department Calling) cannot route calls to your extension.
1. Press Speaker.
2. Dial 750 and 1.
- OR -
Press Uniform Call Distribution Log In key (Program 15-07 or SC 851: 46).
 The key lights while you are logged out.
To log back in to your UCD (Department Calling) Group:
 While you log back in, Uniform Call Distribution routes calls to your extension.
1. Press Speaker.
2. Dial 750 and 0.
- OR -
Press UCD (Department Calling) Log In key (Program 15-07 or SC 851: 46).
 The key goes out when you log back in.