NEC Univerge SV9100 - Page 563

563
Program
Number
Program Name/Description
Input Data
Default
42-07-01
PMS Restriction Level Conversion Table
Change the default Toll Restriction class on
check in for a room (Program 42-02-02).
1 ~ 15
Level 0 = 10
Level 1 = 11
Level 2 = 12
Level 3 = 13
42-09-01
Flexible Setup for Room Status
When Program 42-01-06 is enabled dial room
status codes can be defined in this program.
Note the code definitions only apply to the
system itself, when sending room status
messages to the PMS Application the status
codes are always sent as defined in the PMS
Developer Guide.
1 = Room Clean (Occupied)
2 = Maid Required
3 = Maid in Room
4 = Inspection Required
5 = Maintenance Request
6 = Out of Order
7 = Reserve 1
8 = Reserve 2
9 = Reserve 3
0 = Room Clean (Vacant)
*
= Reserve 5
# = Reserve 6
No Setting
Operation
Refer to the UNIVERGE SV9100 Hotel Manual for complete operation information