NEC Univerge SV9100 - Page 850

850
Guide to Feature Programming
 For additional programming information on Paging, refer to the features Paging, External and Paging,
Internal.
Program
Number
Program Name/Description
Input Data
Default
11-12-21
Service Code Setup (for Service Access) –
Meet-Me Answer to Specified Internal
Paging Group
Customize the Service Codes used for meet-
me answer to specified internal paging group
service access.
MLT, SLT
0 ~ 9,
*
, # Maximum of eight
digits
864
11-12-22
Service Code Setup (for Service Access) –
Meet-Me Answer to External Paging
Customize the Service Codes used for meet-
me answer to external paging service access.
MLT, SLT
0 ~ 9,
*
, # Maximum of eight
digits
865
11-12-23
Service Code Setup (for Service Access) –
Meet-Me Answer in Same Paging Group
Customize the Service
Codes used for meet-me answer in same
paging group service access.
MLT, SLT
0 ~ 9,
*
, # Maximum of eight
digits
863
15-07-01
Programmable Function Keys
Assign function keys for External Zone Paging
(code 19 + zone), External All Call Paging
(code 20), Internal Zone Paging (code 21 +
zone) or Meet Me Conference/Paging Pickup
(code 23).
Line Key 1 ~ 48
0 ~ 99 (Normal Function Code
851 by default)
*
00 ~
*
99 (Appearance
Function Code) (Service Code
852 by default)