NEC Univerge SV9100 - Page 1038

1038
Program
Number
Program Name/Description
Input Data
Default
15-02-30
Multiline Telephone Basic Data Setup – Toll
Restriction Class
Select the Toll Restriction Class used when
placing a call from a virtual extension.
0 = Vir. Ext. (Virtual Extension
Class)
1 = Real Ext. (Real Extension
Class)
1
15-07-01
Programmable Function Keys
Assign the SIE key to the Multiline extension.
Line Key 1 ~ 48
0 ~ 99 (Normal Function Code
851 by default)
*
00 ~
*
99 (Appearance
Function Code) (Service Code
852 by default)
15-08-01
Incoming Virtual Extension Ring Tone Setup
When an extension or a virtual extension is
assigned to the function key on the key
telephone, select the ring tone when receiving a
call on that key.
For CAR keys, only tone pattern 1 can be
used. The remaining patterns are not checked
with this feature.
ICM Tone Pattern,
0 = Pattern 1
1 = Pattern 2
2 = Pattern 3
3 = Pattern 4
4 = Incoming Ring Tone
Extension
5 = Tone Pattern 5
6 = Tone Pattern 6
7 = Tone Pattern 7
8 = Tone Pattern 8
0
15-09-01
Virtual Extension Ring Assignment
Assign the ring options for an extension Virtual
Extension Key or Virtual Extension Group
Answer Key which is defined in Program 15-07.
Mode 1:
0 = No Ring
1 = Ring
0
15-10-01
Incoming Virtual Extension Ring Tone Order
Setup
When two or more virtual extensions are set on
a function key on the telephone, and the tone
pattern by which the sound of each extension
differs, set up the priority of ring sound.
0 = Tone Pattern 1
1 = Tone Pattern 2
2 = Tone Pattern 3
3 = Tone Pattern 4
4 = Incoming Extension Ring
Tone
5 = Tone Pattern 5
6 = Tone Pattern 6
7 = Tone Pattern 7
8 = Tone Pattern 8
Priority order:
1 = 0 (Tone
Pattern 1)
2 = 1 (Tone
Pattern 2)
3 = 2 (Tone
Pattern 3)
4 = 3 (Tone
Pattern 4)
15-11-01
Virtual Extension Delayed Ring Assignment
Assign the delayed ringing options for an
extension Virtual Extension or Virtual Extension
Group Answer keys (defined in Program
15-09).
KY01 Mode 1:
0 = Immediate Ring
1 = Delayed Ring
0
15-18-01
Virtual Extension Key Enhanced Options –
Virtual Extension Key Operation Mode
Define whether calls to a Virtual Extension key
land on the virtual key or on the extension/CAP/
CO appearance.
0 = Release (Release to Line
Appearance)
1 = Land On the Key
0
15-18-02
Virtual Extension Key Enhanced Options –
Display mode when placing a call on Virtual
Extension Key
Define whether calls to or from a Virtual
Extension Key display the Virtual Extension key
name or the name of the extension on which it
resides.
0 = Secondary Extension Name
1 = Actual Station Name
0