NEC Univerge SV9100 - Page 109

109
Program
Number
Program Name/Description
Input Data
Default
15-02-15
Multiline Telephone Basic Data Setup –
Storage of Caller ID for Answered Call
Enable (1) or Disable (0) ability of extension to
store Caller ID for answered calls.
0 = Disable
1 = Enable
1
15-02-40
Multiline Telephone Basic Data Setup –
Additional Dial for Caller ID Call Return
Enter the digits to be dialed in front of the Caller
ID when using Caller ID Call Return.
Maximum of four digits (0, 1~9,
# , *)
No Setting
15-02-57
Multiline Telephone Basic Data Setup –
Caller Log on Busy
When a call to a station returns busy to the
caller, turn On or Off if the call should be logged
in the Call history log as a busy call.
0 = Off
1 = On
1
15-03-09
Single Line Telephone Basic Data Setup –
Caller ID Function – For External Module
Enable/Disable the Caller ID FSK signal for an
external Caller ID module or a 3rd-Party vendor
telephone with Caller ID display.
If voice mail is used, this setting must be
disabled or the system integration codes for
disconnect are incorrect. For Caller ID Sender
Queuing, set this option to “1”.
0 = Disable
1 = Enable
0
15-03-10
Single Line Telephone Basic Data Setup –
Caller ID Name
Determine whether or not a single line
telephone should display the Caller ID name.
0 = Disable
1 = Enable
1
15-07-01
Programmable Function Keys
Assign functions to multiline terminal line keys.
Line Key 1 ~ 48
0 ~ 99 (Normal Function Code
851 by default)
*
00 ~
*
99 (Appearance
Function Code) (Service Code
852 by default)
20-02-08
System Options for Multiline Telephones –
LCD Display Holding Time
Determine the time a user display shows Caller
ID for a second incoming call.
0 ~ 64800 seconds
5
20-06-01
Class of Service for Extensions
Assign a Class of Service (1 ~ 15) to
extensions.
Day Night/Mode: 1 ~ 8
Class of Service of Extensions
(1 ~ 15)
Extension port
101 = Class 15
All other
extension port =
Class 1