NEC Univerge SV9100 - Page 1095

1095

Forced Trunk Disconnect

Trunk Queuing/Camp-On

Group Call Pickup

InMail

Handsfree Answerback/Forced Intercom
Ringing

Voice Over

Hold

Warning Tone for Long Conversation
Data Communications
APA and APR modules can be used with multiline terminals to provide an analog port.
Refer to the individual features for additional descriptive, programming and operational information.
Guide to Feature Programming
Program
Number
Program Name/Description
Input Data
Default
10-03-01
ETU Setup (DLCA PKG Setup) – Terminal
Type (B1)
Program all on-premise 500/2500 type single
line telephones with circuit type 2. Set the
DIOPU trunk to type 1 when trunks should be
defined for off-premise extension (OPX) use.
0 = Not set
1 = Multiline Terminal
3 = Bluetooth Cordless Handset
6 = PGD (Paging)
7 = PGD (Tone Ringer)
8 = PGD (Doorbox)
9 = PGD (ACI)
10 = DSS Console
11 = -- Not Used --
0
10-03-03
ETU Setup (LCA PKG Setup) – Transmit
Gain Level (S-Level)
Set up and confirm the Basic Configuration
data for each blade.
1 ~ 57 (-15.5 +15.5dB)
32 (0dB)
10-03-04
ETU Setup (LCA PKG Setup) – Receive Gain
Level (R-Level)
Assign transmit and receive levels for 500/2500
type single line telephones.
1 ~ 57 (-15.5 +15.5dB)
32 (0dB)