NEC Univerge SV9100 - Page 1144

1144
Program
Number
Program Name/Description
Input Data
Default
35-02-18
SMDR Output Options – Print Mode for
Caller Name of Incoming Call
Determine how SMDR should print Caller
Name of incoming call. Select whether to
display up to 16 characters of the Caller Name
on the same line as the call record (0) or if a line
feed should be added and up to 24 characters
of the Caller Name are displayed on the
following line (1). If the line feed option is
selected, the Caller Name is displayed on the
next line as : NEXT Caller Name.
This setting works regardless of the setting in
Program 35-02-15.
With this option set to 1, if your
communications program (such as HyperTerminal)
has the line wrap option enabled in the ASCII setup,
an additional line break may appear above the
Caller name line.
0 = Normal
1 = Line Feed
0
35-02-21
SMDR Output Options – S-Point Terminal
Number
Set up SMDR Port 1.
0 = MSN Number
1 = Extension Number
0
35-02-22
SMDR Output Options – Security Auto
Dialing
Select whether the system should display the
SAD (Security Auto Dialing) on SMDR report.
SMDR Port 1 ~ 8:
0 = No Output
1 = Output
0
35-02-23
SMDR Output Options – Watch Auto Dialing
Select whether the system should display the
WAD (Warning Auto Dialing) on SMDR report.
SMDR Port 1 ~ 8:
0 = No Output
1 = Output
0
35-02-24
SMDR Output Options – Mark Virtual Loop
Define whether calls routed via the ISDN Virtual
Loopback are tagged.
0 = Don’t Mark
1 = Mark
0
80-05-01
Date Format for SMDR and System – Date
Format
Set the date format for SMDR.
0 = American Format (Month /
Day / Year)
1 = Japanese Format (Year /
Month / Day)
2 = European Format (Day /
Month / Year)
0