NEC Univerge SV9100 - Page 1190

1190
Guide to Feature Programming
 The items highlighted in gray are read only and cannot be changed.
Encryption:
Program
Number
Program Name/Description
Input Data
Default
10-46-07
DT800/DT700 Server Information Setup –
Encryption Mode
Set encryption for signaling (requires system
reset).
0 = Off
1 = On
0
10-46-08
DT800/DT700 Server Information Setup –
Encryption Type
Read Only
0 = Mode 1
0
10-46-09
DT800/DT700 Server Information Setup –
One Time Password
Set the one-time password for encryption
authentication to the DT700.
Maximum of 10 characters
(0~9, *, #)
No Setting
15-25-01
DESI-less Page Setup – Incoming Call Notify
Event
Enable/Disable the ability of a DESI-Less
terminal to blink the page number that has an
incoming call on one of the keys.
0 = Disable
1 = Enable
1
15-25-02
DESI-less Page Setup – Incoming Call
Automatic Screen Switching
Enable/Disable the ability of a DESI-Less
terminal to switch to the page that has an
incoming call on one of the keys.
0 = Disable
1 = Enable
1
15-25-03
DESI-less Page Setup – Idle Automatic
Screen Switching
Define or Disable the page to be automatically
displayed when a DESI-Less terminal becomes
idle.
0 = Disable
1 = Display page 1
2 = Display page 2
3 = Display page 3
4 = Display page 4
0
15-25-04
DESI-less Page Setup – Answer Automatic
Screen Switching
Define or Disable the page to be automatically
displayed when a DESI-Less terminal answers
a call.
0 = Disable
1 = Display page 1
2 = Display page 2
3 = Display page 3
4 = Display page 4
0
84-23-08
DT800/DT700 Multiline Basic Information
Setup – Digest Authorization Registration
Expire Timer
Set the time for authentication update.
0 ~ 4294967295 seconds
0
84-23-09
DT800/DT700 Multiline Basic Information
Setup – Temporary Password
Read Only