NEC Univerge SV9100 - Page 1194

1194
Guide to Feature Programming
Program
Number
Program Name/Description
Input Data
Default
15-07-01
Programmable Function Keys
Assign functions to multiline terminal line keys.
Line Key 1 ~ 48
0 ~ 99 (Normal Function Code
851 by default)
*
00 ~
*
99 (Appearance
Function Code) (Service Code
852 by default)
*
35 - System Call History
Related System Data:
Program
Number
Program Name/Description
Input Data
Default
15-02-34
Multiline Telephone Basic Data Setup – Call
Register Mode
The Caller ID Scroll stores Trunk calls only (0),
or both Internal and Trunk calls (1).
For the ML440 extensions this should be set to
1.
0 = Trunk Mode
1 = Extension/Trunk Mode
0
15-07-01
Programmable Function Keys
Assign functions to multiline terminal line keys.
Line Key 1 ~ 48
0 ~ 99 (Normal Function Code
851 by default)
*
00 ~
*
99 (Appearance
Function Code) (Service Code
852 by default)
*
08 - Incoming Caller ID list
Operation
1. User pushes the System Caller Log key in idle mode.
2. User can check the all of the system caller log one by one.
System Caller Log Example 1
3. User can page by pushing up and down key.