NEC Univerge SV9100 - Page 126

126
Guide to Feature Programming
Program
Number
Program Name/Description
Input Data
Default
13-01-03
Speed Dialing Option Setup – Number of
Common Speed Dialing Bins
Designate the bins the system uses for System
Speed Dialing.
0 ~ 10000
0 = No Common Speed Dialing
1000
13-04-01
Speed Dialing Number and Name – Speed
Dialing Data
Enter the System and Group Speed Dialing
numbers and names.
Maximum of 24 digits (0 ~ 9,
*
,
#, @, P, R)
@ = Wait for Answer
Supervision - ISDN trunks only
P = Pause - Analog Trunk Only
R = Hook flash - Analog Trunk
Only
No Setting
13-04-08
Speed Dialing Number and Name – Memo
Display 1
This can only be set using Web Pro or PC Pro
and determines what will be displayed on line 1
of the multiline telephone when Program
15-02-58 is set to memo.
Maximum of 28 characters
No Setting
13-04-09
Speed Dialing Number and Name – Memo
Display 2
This can only be set using Web Pro or PC Pro
and determines what will be displayed on line 2
of the multiline telephone when Program
15-02-58 is set to memo.
Maximum of 28 characters
No Setting
13-04-10
Speed Dialing Number and Name – Memo
Display 3
This can only be set using Web Pro or PC Pro
and determines what will be displayed on line 3
of the multiline telephone when Program
15-02-58 is set to memo.
Maximum of 28 characters
No Setting
15-02-58
Multiline Telephone Basic Data Setup –
Display Mode of Incoming Trunk
Determines if the incoming CID or the Memo 1/
2/3 setting will be displayed for a matching CID
number.
0 = Caller ID
1 = Memo Information
0
Operation
None