NEC Univerge SV9100 - Page 129

129
Guide to Feature Programming
Program
Number
Program Name/Description
Input Data
Default
15-07-01
Programmable Function Keys
Assign functions to multiline terminal line keys.
Line Key 1 ~ 48
0 ~ 99 (Normal Function Code
851 by default)
*
00 ~
*
99 (Appearance
Function Code) (Service Code
852 by default)
20-02-23
System Options for Multiline Telephones –
UX5000 Phone Operation Mode
Selects the Loop Key operation like the
UX5000 terminal, or the CAP Key operation like
the SV9100 terminal.
0 = Original Operation Mode
(CAP Key)
1 = UX5000 Special Operation
Mode (Loop Key)
0
20-06-01
Class of Service for Extensions
Assign a Class of Service (1 ~ 15) to
extensions.
Day Night/Mode: 1 ~ 8
Class of Service of Extensions
(1 ~ 15)
Extension port
101 = Class 15
All other
extension port =
Class 1
20-11-19
Class of Service Options (Hold/Transfer
Service) – Hold/Extended Park
Determine whether an extension Class of
Service should allow normal or extended Park
(0 = Normal for Program 24-01-06, 1 =
Extended for Program 24-01-07).
0 = Off
1 = On
COS 1 ~ 15 = 0
24-01-01
System Options for Hold – Hold Recall Time
A call on Hold recalls the extension that placed
it on Hold after this time. This time works with
the Hold Recall Callback Time.
0 ~ 64800 seconds
90
24-01-02
System Options for Hold – Hold Recall
Callback Time
A call that is parked longer than the
programmed time recalls the extension where it
was initially parked.
0 ~ 64800 seconds
30