NEC Univerge SV9100 - Page 1295

1295
System Availability
Terminals
None
Required Component(s)
Any Blade
Related Features
None
Guide to Feature Programming
 The items highlighted in gray are read only and cannot be changed.
Program
Number
Program Name/Description
Input Data
Default
10-03-01
ETU Setup
Set up and confirm the basic configuration data
for each blade. This program represents
different data depending on the blade installed
in the slot.
The assigned data varies
depending on the blade installed
in the slot.
90-34-01
Firmware Information – Pkg Name
List the package type and firmware for the
packages installed.
The data varies depending on
the card in the slot.
90-34-02
Firmware Information – Firmware Version
Number
View the package name and firmware for each
blade.
The data varies depending on
the card in the slot.
Operation
None