EasyManua.ls Logo

NEC Univerge SV9100 - Page 1306

NEC Univerge SV9100
1402 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1306
The following chart illustrates the input data for Program 45-04-01~Program 45-04-09 (Voice Mail Digit
Add Assignment) based on the setting in Program 45-01-15 (Analog Voice Mail Protocol Selection) and
Program 45-01-17 (Reply Mailbox Number). If Program 45-01-15 is set to 0 it uses the Fixed Memory
Location for the Leading Digits or, if set to 1 it uses Program 45-04-01~Program 45-04-09 for the
Leading Digits. If Program 45-01-17 is set to 0, it does not have the calling party in the Trailing Digits.
The default values for Program 45-04-01~Program 45-04-09 are not assigned.
Use the chart below to determine what leading and trailing digits are sent to the Analog Voice Mail
System.
Program
Program 45-01-15 Program 45-01-15 Program 45-01-15
(0 = Fixed) (1 = Program) (1=Program)
Program 45-01-17 Program 45-01-17 Program 45-01-17
(1=Yes or 0=No)
(1=Yes)
(0=No)
Description
45-04-01 - Remote Logon
(Internal)
Up to four digits *
Default not assigned
***1XXX
Up to four digits +
XXX
Up to four digits +
XXX
Remote Log-On (Internal)
Internal call to VM from
extension XXX.
User has not indicated intent to
enter mail box.
45-04-02 - Direct Logon
Up to four digits *
Default
not assigned
#XXX
Up to four digits +
XXX
Up to four digits +
XXX
Direct Log-On
Connect user to mail box for
extension XXX.
45-04-03 - Transfer
Message
Up to four digits *
Default not assigned
***2YYY
***2XXXYYY
Up to four digits +
YYY
Or
Up to four digits +
XXXYYY
Up to four digits +
YYY
Transfer Message
User is transferring a call to VM
Record a message to be placed
in mail box of extension YYY.
Record Message for Called
Extension (QVM)
Record a message to be placed
in mail box of extension YYY.
Store source extension number
XXX for automatic reply feature.
Program
Program 45-01-15 Program 45-01-15 Program 45-01-15
(0 = Fixed) (1 = Program) (1=Program)
Program 45-01-17 Program 45-01-17 Program 45-01-17
(1=Yes or 0=No)
(1=Yes)
(0=No)
Description
45-04-04 - Forward-All
Up to four digits *
Default not assigned
***3UUUZZZ
Up to four digits +
UUUZZZ
Up to four digits +
ZZZ
Forward-All
Extension or Trunk UUU that
called extension ZZZ and was
forwarded to the Voice Mail Box
of extension ZZZ.
45-04-05 - Forward-Busy
Up to four digits *
Default not assigned
***4UUUZZZ
Up to four digits +
UUUZZZ
Up to four digits +
ZZZ
Forward-Busy
Extension or Trunk UUU that
called extension ZZZ and was
forwarded to the Voice Mail Box
of extension ZZZ.

Table of Contents

Other manuals for NEC Univerge SV9100

Related product manuals