NEC Univerge SV9100 - Page 1308

1308
GPZ-4LCF (4-Port daughter board)
GCD-8LCF (8-Port main blade)
GPZ-8LCF (8-Port daughter board)
Related Features
 Barge-In
 Caller ID
 Direct Inward Line (DIL)
 Hold
 Message Waiting
 One-Touch Calling
 Programmable Function Keys
 Transfer
Guide to Feature Programming
Program
Number
Program Name/Description
Input Data
Default
10-09-01
DTMF and Dial Tone Circuit Setup
Assign at least one circuit for DTMF reception
(0 or 1).
Use the following as a guide when allocating
DTMF receivers:
In light traffic sites, allocate one DTMF receiver
for every 10 devices that use them.
In heavy traffic sites, allocate one DTMF
receiver for every five devices that use them.
0 = Common Use
1 = Extension Only
2 = Trunk Only
Circuit/Resource
01 ~ 08 = 1
(Extensions)
Circuit/Resource
09 ~ 32 = 2
(Trunks)
Circuit/Resource
33 ~ 144 = 0
(Common)
When PZ-BS10
is installed, 81 ~
144 are available
11-07-01
Department Group Pilot Numbers – Dial
Assign a Department Group pilot number for
the Voice Mail. The extensions are assigned to
the group in Program 16-02-01.
Maximum of eight digits.
No Setting
11-11-50
Service Code Setup (for Setup/Entry
Operation) – Set Message Waiting Indication
Assign a Service Code to set a Message
Waiting light from an Analog Voice Mail port.
SLT
0 ~ 9,
*
, # Maximum of eight
digits
No Setting
11-11-51
Service Code Setup (for Setup/Entry
Operation) – Cancel Message Waiting
Indication
Assign a Service Code to cancel a Message
Waiting light from an Analog Voice Mail port.
SLT
0 ~ 9,
*
, # Maximum of eight
digits
No Setting