NEC Univerge SV9100 - Page 132

132
Guide to Feature Programming
Program
Number
Program Name/Description
Input Data
Default
11-01-01
System Numbering – Service Code
Set system numbering plan.
Set the system internal
(Intercom) numbering plan. The
numbering plan assigns the first
and second digits dialed and
affects the digits an extension
user must dial to access other
extensions and features, such
as service codes and trunk
codes. If the default numbering
plan does not meet the site
requirements, use this program
to tailor the system numbering to
the site.
11-04-01
Virtual Extension Numbering
Assign virtual extension numbers.
Dial (maximum of eight digits)
Virtual Extension
Port No. 1 ~ 99 =
Virtual Extension
Number
201 ~ 299
Virtual Extension
Port No. 100 ~
512 = No Setting
15-01-01
Basic Extension Data Setup – Extension
Name
Define the extension/virtual extension name.
Maximum of 12 characters
STA 101 = Ext
101
STA 102 = Ext
102, etc.