NEC Univerge SV9100 - Page 1365

1365
Program
Number
Program Name/Description
Input Data
Default
31-04-01
External Paging Zone Group – Paging
Group Number
Assign each External Paging Speaker to an
External Paging Zone.
0 ~ 8 (0 = No Setting)
Speaker 1
[PGD(2)-U10] =
1 (Group 1)
Speaker 2
[PGD(2)-U10] =
2 (Group 2)
Speaker 3
[PGD(2)-U10] =
3 (Group 3)
Speaker 4
[PGD(2)-U10] =
4 (Group 4)
Speaker 5
[PGD(2)-U10] =
5 (Group 5)
Speaker 6
[PGD(2)-U10] =
6 (Group 6)
Speaker 7
[PGD(2)-U10] =
7 (Group 7)
Speaker 8
[PGD(2)-U10] =
8 (Group 8)
Speaker 9
(GCD-CP10) = 1
(Group 1)
31-06-01
External Speaker Control – Broadcast
Splash Tone Before Paging (Paging Start
Tone)
Enable/Disable splash tone before Paging over
an external zone. If enabled, the system
broadcasts a splash tone before the External
Paging announcement.
0 = No Tone (None)
1 = Splash Tone
2 = Chime Tone
2
31-06-02
External Speaker Control – Broadcast
Splash Tone After Paging (Paging End Time)
Enable/Disable splash tone after Paging over
an external zone. If enabled, the system
broadcasts a splash tone at the end of an
External Paging announcement.
0 = No Tone (None)
1 = Splash Tone
2 = Chime Tone
2
40-10-01
Voice Announcement Service Option – VRS
Fixed Message
Enable/Disable the system ability to play the
fixed VRS messages (such as, You have a
message).
0= Not Used
1= Used
0
40-10-05
Voice Announcement Service Option – Park
and Page Repeat Timer (VRS Msg Resend)
If a Park and Page is not picked up in this time,
the Paging announcement repeats.
0 ~ 64800 seconds
0