NEC Univerge SV9100 - Page 1378

1378
Supported Wireless DECT (SIP) Features (Continued)
Feature Name
SIP
DECT
Comments SIP DECT
PC Programming
Yes
IP stations can be programmed from PCPro for IP
duplication.
Power Failure Transfer
No
Prime Line Selection
Yes
Private Line
Yes
Programmable Function Keys
No
Programming from a Multiline Terminal
N/A
Pulse to Tone Conversion
No
Redial Function
No
Handset has redial list.
Quick Transfer to Voice Mail
Yes
MLTs can q/t to the SIP DECT VM, but SIP DECT handset
cannot execute Q/T.
Remote (System) Upgrade
N/A
Repeat Redial
No
Resident System Program
N/A
Reverse Voice Over
No
Ring Groups
Yes
Ringdown Extension, Internal/External
Yes
IP DECT handset can only be the ringdown destination. It
cannot initiate ringdown.
Room Monitor
No
Save Number Dialed
No
Handsets have own phone book and redial lists
Secondary Incoming Extension
No
Secretary Call (Buzzer)
No
Secretary Call Pickup
No
Selectable Display Messaging
No
Selectable Ring Tones
Yes
Ring tones are selectable at the handset level, specific to the
type of call.
Serial Call
No
Single Line Telephones, Analog 500/2500 Sets
No
Softkeys
No
All keys are fixed in C124 handset.
Speed Dial - System/Group/Station
No
Station Hunt
No
Station Message Detail Recording
Yes
Station Name Assignment – User Programmable
Yes
Handset name can be programmed in the handset (it does
not show the name in Program 15-01-01), but will not display
back to IPK II callers.