NEC Univerge SV9100 - Page 181

181
Guide to Feature Programming
Program
Number
Program Name/Description
Input Data
Default
11-11-23
Service Code Setup (for Setup/Entry
Operation) – Second Call for DID/DISA/DIL
This service code enables Second Call to each
extension when Program 20-09-01 (Second
Call) is set to 0 (disable).
MLT
0 ~ 9,
*
, # Maximum of eight
digits
779
11-12-04
Service Code Setup (for Service Access) –
Set Camp-On
Customize the Service Code, which is to be
used for setting Camp-On.
MLT, SLT
0 ~ 9,
*
, # Maximum of eight
digits
850
11-12-05
Service Code Setup (for Service Access) –
Cancel Camp-On
Customize the Service Code, which is to be
used for cancelling Camp-On.
MLT, SLT
0 ~ 9,
*
, # Maximum of eight
digits
870
11-12-47
Service Code Setup (for Service Access) –
Call Waiting Answer/Split Answer
If required, use this program to change the
code users dial to Split while on a call.
SLT
0 ~ 9,
*
, # Maximum of eight
digits
894
11-16-05
Single Digit Service Code Setup – Camp-On
Customize the 1-digit Service Code used for
setting Camp-On.
0 ~ 9,
*
, # Maximum of one digit
#