NEC Univerge SV9100 - Page 205

205
Guide to Feature Programming
Program
Number
Program Name/Description
Input Data
Default
11-11-24
Service Code Setup (for Setup/Entry
Operation) – Change Station Class of
Service
If required, change the Service Code a user
dials to change an extension Class of Service.
MLT
0 ~ 9,
*
, # Maximum of eight
digits
777
20-06-01
Class of Service for Extensions
Assign a Class of Service (1 ~ 15) to
extensions.
Day Night/Mode: 1 ~ 8
Class of Service of Extensions
(1 ~ 15)
Extension port
101 = Class 15
All other
extension port =
Class 1
20-07-01
Class of Service Options (Administrator
Level) – Manual Night Service Enabled
Turn Off or On an extension ability to manually
Switch the Night Mode (Service Code 718).
This option must be enabled for an extension to
be able to display the Night indication.
0 = Off
1 = On
COS 1 ~ 14 = 0
COS 15 = 1
20-07-02
Class of Service Options (Administrator
Level) – Changing the Music on Hold Tone
Turn Off or On an extension user ability to
change the Music on Hold tone.
0 = Off
1 = On
COS 1 ~ 14 = 0
COS 15 = 1
20-07-03
Class of Service Options (Administrator
Level) – Time Setting
Turn Off or On an extension user ability to set
the Time via Service Code 728.
0 = Off
1 = On
COS 1 ~ 15 = 1
20-07-04
Class of Service Options (Administrator
Level) – Storing Speed Dialing Entries
Turn Off or On an extension to store System or
Group Speed Dialing numbers.
0 = Off
1 = On
COS 1 ~ 15 = 1
20-07-05
Class of Service Options (Administrator
Level) – Set/Cancel Automatic Trunk-to-
Trunk Transfer
Turn Off or On an extension user ability to use
the Trunk-to-Trunk Forwarding service codes.
0 = Off
1 = On
COS 1 ~ 15 = 0
20-07-06
Class of Service Options (Administrator
Level) – Charging Cost Display
0 = Off
1 = On
COS 1 ~ 15 = 0
20-07-10
Class of Service Options (Administrator
Level) – Programmable Function Key
Programming (Appearance Level)
Turn Off or On an extension user ability to
program the Appearance function keys using
Service Code 852.
0 = Off
1 = On
COS 1 ~ 15 = 1