NEC Univerge SV9100 - Page 246

246
Guide to Feature Programming
Program
Number
Program Name/Description
Input Data
Default
11-12-08
Service Code Setup (for Service Access) –
Barge-In
Determine what the service code should be for
an internal party to use the Barge-In feature.
MLT, SLT
0 ~ 9,
*
, # Maximum of eight
digits
810
11-12-47
Service Code Setup (for Service Access) –
Call Waiting Answer/Split Answer
If required, change the code users dial to Split
while on a call.
SLT
0 ~ 9,
*
, # Maximum of eight
digits
894
11-12-57
Service Code Setup (for Service Access) –
Tandem Trunking
With two trunks in Conference press Hold and
dial #8 and the Conference/Tandem happens.
MLT, SLT
0 ~ 9,
*
, # Maximum of eight
digits
#8
11-12-58
Service Code Setup (for Service Access) –
Transfer Into Conference
If required, change the service code used to
transfer a call into a Conference call.
MLT, SLT
0 ~ 9,
*
, # Maximum of eight
digits
724
11-16-02
Single Digit Service Code Setup – Barge-In
Customize the one-digit Service Codes used for
Barge-In.
0 ~ 9,
*
, # Maximum of one digit
No Setting
14-01-04
Basic Trunk Data Setup – Transmit Gain
Level for Conference and Transfer Calls
Select the CODEC gain type used by the trunk
when it is part of an unsupervised conference.
1 ~ 57
(-15.5 dB ~ +12.5 dB in 0.5 dB
intervals)
32 (0 dB)
15-02-24
Multiline Telephone Basic Data Setup –
Conference Key Mode
Allow an extension Conf key to be programmed
for Conference or for Transfer. When set for
Transfer, the user places a call on hold, dials
the extension to which it should be transferred,
then presses the Conf key. The call is then
transferred. When set for Conference, with an
active call, the user presses the Conf key,
places a second call, then presses the Conf key
twice. All the calls are then connected.
0 = Conference
1 = Transfer
0
15-07-01
Programmable Function Keys
Assign functions to multiline terminal line keys.
Line Key 1 ~ 48
0 ~ 99 (Normal Function Code
851 by default)
*
00 ~
*
99 (Appearance
Function Code) (Service Code
852 by default)
20-03-01
System Options for Single Line Telephones
– SLT Call Waiting for Answer Mode
For a busy single line (500/2500 type)
telephone, set the mode used to answer a
camped-on trunk call.
For ESL sets, enabling this option (1) allows the
user to dial Service Code for Voice Mail
Conversation Record.
0 = Hookflash (Hooking)
1 = Hookflash + Service Code
794
Service Code 654 is for Live
Recording at SLT (Program
11-12-53).
0
20-06-01
Class of Service for Extensions
Assign a Class of Service (1 ~ 15) to
extensions.
Day Night/Mode: 1 ~ 8
Class of Service of Extensions
(1 ~ 15)
Extension port
101 = Class 15
All other
extension port =
Class 1