NEC Univerge SV9100 - Page 252

252
If Program 20-34-06 is set to normal and no VRS license exists in the system you will get
ring no answer (RNA) when calling the Remote Conference pilot.
Default Settings
None
System Availability
Terminals
All Terminals
Required Component(s)
Remote Conference license (0047)
Port License (0300)
Version 1 Enhancement license (0411)
VRS Port License (1001) – Required if remote conferences will be password protected.
Related Features
Simple MCU Video
Guide to Feature Programming
Program
Number
Program Name/Description
Input Data
Default
11-19-01
Remote Conference Group Pilot Number
Enter the pilot number for remote conference.
Must work within current system
dialing plan.
No Setting
14-01-03
Basic Trunk Data Setup – Receive Level
Use this option to select the CODEC gain for
the trunk. The option sets the gain (signal
amplification) for the trunk you are
programming
Trunks 1~400
1 ~ 57
(-15.5 ~ +12.5dB in 0.5dB
intervals)
32 (0dB)
14-01-04
Basic Trunk Data Setup – Transmit Gain
Level for Conference and Transfer Calls
Use this option to select the CODEC gain type
used by the trunk when it is part of an
Unsupervised Conference.
1 ~ 57 (-15.5dB ~ +12.5dB in
0.5dB intervals)
32 (0 dB)
14-01-05
Basic Trunk Data Setup – Receive Gain
Level for Conference and Transfer Calls
Use this option to select the CODEC gain type
used by the trunk when it is part of an
Unsupervised Conference.
1 ~ 57 (-15.5dB ~ +12.5dB in
0.5dB intervals)
16 (-8 dB)
14-02-09
Analog Trunk Data Setup – Busy Tone
Detection
Set the basic options for each analog trunk port.
0 = Disabled
1 = Enabled
0